Home / WSDOT

WSDOT


This PGSuper configuration is part of the default PGSuper installation and is hosted on the WSDOT ftp site. All project criteria settings reflect WSDOT's interpretation of the AASHTO specification.

Implemented Girder Shapes

  • All precast, prestressed bridge girder shapes currently used at WSDOT

Assumptions and Limitations

  • Detailed implementation of provisions stated in the WSDOT LRFD Bridge Design Manual
  • Girder lifting and hauling are considered
  • Strand layouts per WSDOT standard plans
  • Stirrup layouts per WSDOT standard plans

Quality Rating: OFFICIAL

PGSuper Set Up Instructions

This configuration is installed with PGSuper when the WSDOT modifications are selected at installation, and is stored on WSDOT's configuration server.

  1. Make sure your computer is connected to the Internet.
  2. Start PGSuper and select "Configure PGSuper from the File menu.
  3. Select the WSDOT libraries and templates server
  4. Select the "WSDOT " configuration
  5. Click "Update Libaries and Templates Now"
  6. You can now open WSDOT templates from the File|New menu.

References

Revision History

  • Revision history stored on PGSuper Revision History Page

Developer

  • Washington State Department of Transportation

Disclaimer

IN NO EVENT WILL WE BE LIABLE TO YOU FOR ANY DAMAGES, INCLUDING ANY LOST PROFITS, LOST SAVINGS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR THE INABILITY TO USE THE SOFTWARE (EVEN IF WE OR AN AUTHORIZED DEALER OR DISTRIBUTOR HAS BEEN ADVISED OF THE POSSIBILITY OF THESE DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY.

SOME STATES DO NOT ALLOW THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.